Thanks to a very effective trick we will be able to make the toilet bowl clean and shiny, like it happens in 5 star hotels. Here’s how to do it.
In our homes we tend to always have every room and every piece of furniture as clean as possible without traces of dirt and dust and use products suitable for each surface.
However, it happens that some areas of our home cannot be cleaned as thoroughly as we would like and this causes us great discomfort, especially when we have guests who can sometimes appear suddenly.
Toilet: Here is the trick to clean it like in luxury hotels
One of the dirtiest areas in the house is the bathroom, which even though we wash it daily due to daily use, is always messy.
But in this case there is an element of the bathroom that is always dirty, even if we wash it continuously, due to its constant use and the yellowing that occurs over time.
We are talking about the toilet that we use for our purposes and therefore often deteriorates or loses its shine and we are forced to polish it every day to make it shiny and clear again.
It happens, also due to the silicone that retains the water, as well as for the taps, that it turns black towards the bottom and a black halo forms that we cannot remove.
We must be careful not to rub too hard to remove this dirt because we could remove the silicone and damage our toilet which will start gushing water and we would have to ask the plumber for help.
But not everyone knows that there is a perfect method to make our toilet clean and shiny, and this trick is often used by the chambermaids of five-star hotels to make customers happy.
The process and the natural ingredient
Before using the purchased product to clean the toilet, you need to clean our toilet with toilet paper. Immediately afterwards, put a spoonful of soda into the toilet, preferably the ecological and multi-purpose toilet.
Once this is done, using rubber gloves and being careful not to let the products come into contact with the skin, spray the plumbing cleaning product onto a sponge and begin rubbing it on each surface of the toilet.
Once the toilet bowl is covered with the product, take a microfiber cloth and wet it and squeeze it well and put it on the toilet so that all the previous cleaning agent is absorbed.
Then cover the toilet bowl and use the brush to remove all the soda ash and let it drain onto the floor. Finally, take a teaspoon of this ingredient and dissolve it in water.
Take a surface cloth and moisten it with the solution and pass it over the toilet seat so that all residue and excess dirt can be removed.
In this way, our toilet bowl becomes absolutely clean and disinfected and remains shiny for a long time, which makes everyone who uses our bathroom jealous and asks us the secret of such a thorough cleaning.