Thanks to a very effective trick, we can have toilets as clean and shiny as in 5-star hotels. Here’s how.
Clean and shiny water
In our homes, we always tend to make every room and piece of furniture as clean as possible, without any trace of dirt or dust, and we use products suitable for each surface.
However, it happens that certain areas of our house do not manage to be cleaned as thoroughly as we would like and this annoys us a lot, especially when we receive guests, who can sometimes appear unexpectedly.
Water: here is the trick to clean it like in luxury hotels
One of the dirtiest places in the house is the bathroom which, despite the fact that we tend to wash it even days due to the use we make of it always remains in disorder.
But in this case, there is an item in the bathroom that is always dirty even though we wash it all the time due to continuous use and yellowing that occurs over time.
It is about the toilets, which we use for our needs and which, therefore, often deteriorate or lose their shine, which forces us to polish them every day to make them shiny and clear again.
Water: the method to clean it perfectly
It happens, partly because of the silicone which retains the water, so it is also the case of the taps, that towards the bottom it blackens and that a black halo that we do not know how to remove.
We must be careful not to rub too hard to remove this dirt, because we could remove the silicone and damage our toilets, which would start squirting water and we would have to call the plumber.
But not everyone knows that there is a perfect method to make our toilets clean and shiny, and this trick is often used by the maids of five-star hotels to satisfy their customers.
The process and the natural ingredient
Before using the product you purchased to clean the toilets, you must wipe them down with toilet paper. Immediately after, place a spoonful of sodium carbonate, preferably environmentally friendly and versatile, inside the toilet.
Then, using rubber gloves and being careful that the products do not come into contact with the skin, spray the sanitary cleaner on a sponge and start rubbing it on all surfaces of the toilet.
Once the toilet is covered with the product, take a microfiber cloth, wet it, wring it well and wipe the toilet so that all the previous detergent is absorbed.
Water: the method to clean it perfectly
Then, uncover the toilet and, with the mop, remove all the sodium carbonate and let it go down to the bottom. Finally, take a teaspoon of this ingredient and dissolve it in water.
Take a surface cloth and dampen it in the solution, then wipe down the toilet seat with this cloth to remove all residue and excess dirt.
In this way, our toilets will be completely clean and sanitized and will remain shiny for a long time, being the envy of all who use our bathroom and ask us for the secret of such thorough cleaning.
