How can you remove encrusted limescale from holes in the shower with this simple and inexpensive remedy

How  to remove  encrusted limescale from holes in the shower  with this simple and inexpensive remedy.  As soon as you notice that the water flow from the shower head is decreasing, all you need to do is follow one of these tips and you will see that the problem is solved in no time.

lemon juice

As you may already know  , lemon is a citrus fruit with numerous properties, including anti-limescale properties.  Here are the steps you need to follow to do this:

  1. Squeeze the lemon to get its juice and pour it into half a liter of water
  2. Take an old toothbrush and dip it into the solution
  3. Rub the shower head  and make repeated motions over the holes
  4. If the  traces of lime  remain stubborn at the level of the depressions, you will need to use a cotton swab dipped in the solution
  5. Rinse and let the water run

The washing schedule is once  a week  .

Free the holes in the shower from encrusted limescale with this simple and inexpensive remedy: anti-limescale cream

Here we produce a  certified anti-limescale cream   . In fact, it is not a cream that you can buy directly in the supermarket, but that you prefer to make at home.

To do this, proceed as follows:

  1. Add  4 generous spoonfuls of starch  to a  saucepan
  2. Pour in the vinegar little by little  until   you get a homogeneous mixture
  3. Cook over low heat  so that it thickens well
  4. Wait for the mixture to turn into a gel
  5. Let yourself rest
  6. Apply the cream to the entire surface of the shower head
  7. Leave on for a few hours
  8. Rinse everything out

What is the pool method?

This is a  tip that only works on removable showerheads  . However, it is  very effective at removing stubborn limescale deposits  .

  1. Half fill a bowl  with lukewarm water
  2. Fill the other half with  white vinegar  and 70g baking soda
  3. Immerse the disassembled knob in the solution for at least 3 hours
  4. Rinse under running water with a brush  or insert a needle into the holes without insisting too much
  5. Install the shower head  and  run water

The other two tips

The first is to  add two tablespoons  of baking soda  and white vinegar to a food bag and soak the shower head in it overnight  . You can stabilize the bag by tying a knot or using a ribbon or elastic band.  This is the trick with non-removable showerheads.

The second method is the fabric trick, in which you tie the kitchen towel generously soaked in vinegar over the shower head.  The idea is not to squeeze the cloth.  Next, wrap the cloth with cling film and let it rest overnight  . The next day you will notice that the traces of limescale are transferred to the cloth and you  only have to refine the cleaning with a brush before rinsing  .

Navigation d’article