This washing powder is excellent except for washing clothes, try it in the bathroom! Surprising result!

Did you think washing powder was just for washing machines? You were really wrong. Yes, because this type of detergent is also particularly useful for cleaning our toilets as best as possible . Let’s see how.

R5* sodium percarbonate washing powder: characteristics
Powder detergents present a series of absolutely functional characteristics for different uses. Perhaps not everyone knows that the whitening properties of this detergent are impressive: the granular composition itself allows dirt to dissolve and “scratch”.

Organic stain particles are easily destroyed due to the composition of the granules combined with water. In fact, using a washing powder with percarbonate seems practically perfect for items like towels and sheets, but also for all the clothes we use daily.

It is effective even at 60 degrees. Some washing powders are enriched with active oxygen , which has an interesting characteristic, namely that it sanitizes, does not pollute and has no negative impact on the environment.

The real advantage comes from the presence of Sodium Percarbonate R5. Even the presence of this extra element allows powder detergents to be considered an excellent product for heavily soiled clothes and heavily loaded washing machines.

Clean the bathroom with detergent
We have seen the characteristics of washing powder, now let’s look at the specific use it can be made of and which represents a kind of trick. This detergent, in fact, can be used to better clean our bathroom .

Typically, the toilet bowl may turn yellow and have stains caused by limescale and general use. This is normal and not worrying. It is precisely from this perspective that washing powder is extremely useful.
Simply place a measuring spoon in the cup and rinse . At this point it is advisable to wait until the water has finished flowing into the glass and then start spreading the powder. We try to add more powder to the most yellowed spots and areas.

Once this phase is over, you will have to wait at least thirty minutes for the product to take effect. Once the necessary time has elapsed, we will have to try to eliminate the excess product: perhaps we can help ourselves with the brush.

As we scrape and remove the excess powder, we may notice a large amount of foam forming. The brush can also be left in the toilet so that it can be disinfected and then dried.

Once this phase is completed, we can flush the toilet and we will immediately notice that the toilet is practically like new !

*Sodium Percarbonate R5 is an ecological whitener which simultaneously exerts a cleaning, sanitizing and whitening action.

Home