When it comes to cleaning limescale from our bathtub, there are a large number of chemical products sold on the market, but have you ever found that they didn’t work so well? Or that you fill the bathroom with a corrosive, strong and harmful odor for your health?
If you have found yourself in this situation, in today’s article we have compiled some tips on how to clean limescale from your bathtub easily , quickly and with natural ingredients that can avoid causing damage to you or your home, the environment and It will also leave your bathroom like new. Come on!
1- Put vinegar + salt on the surface
To remove limescale from the bathtub, you must first look at the most affected areas, which are usually right behind the tap where a large amount of water and humidity accumulates. Right there we have to apply a mixture of vinegar and salt to combat it.
The ideal is to place this mixture of the two ingredients that you may have at home and let them act for a few minutes. You can then scrub with a sponge to remove excess and rinse with hot water to leave your tub sparkling clean.
2- Spray hydrogen peroxide
Hydrogen peroxide is another great ingredient that we can have in our home to use whenever we need it to clean, degrease, disinfect, whiten and more . In the case of fighting limescale in the bathtub, it is also very useful.
This involves placing hydrogen peroxide inside a vaporizer or some type of vaporizer and spreading it over the areas where there is scale. Leave it on for a few minutes and then rub the tartar area with a sponge to remove it.
3- Always use a sponge
When cleaning limescale from your bathtub or rust stains, among other things, that you may find, it is very practical to use a soft sponge as your main tool . Hard sponges or bristle brushes can scratch or mar the surface.
That is why it is practical, whenever you are preparing to clean your bathtub, to do it with a sponge or microfiber cloth that does not mark or damage it so that you can continue enjoying it.
4- Maintenance with detergent or neutral soap
When it comes to maintaining our bathtub, it is best to do so by mixing soap or neutral detergent with warm water and wetting our sponge in it to be able to rub the surface of the bathtub and the limescale spots with it . You can do this after each use of the bathtub or shower to prevent the build-up of limescale, mildew, etc.
Another trick to remove stains from the bathtub
Although limescale is one of the most difficult problems to treat and eliminate in bathtubs, there are other types of stains or dirt that we must also eliminate to get a perfect, clean and sparkling bathtub, ideal for enjoying a good bath. Here are some tips for you to do this successfully.
remove rust stains
These rust stains also tend to reappear in bathtubs or in the bathroom, especially near faucets or mixers where moisture is in constant contact with the metal . That is why the use of citrus to eliminate them is highly recommended.
To do this, we must mix the juice of 1 lemon with 1 tablespoon of salt and add this mixture to a sponge, then clean the faucets or other areas where there are rust stains. The power of citrus will go a long way in removing those stains and you can get a super tidy tub without the mess. You can help yourself by rubbing with a sponge.