Clean and shiny toilet, this is the trick that even 5 star hotels use

Thanks to a very effective trick we will be able to make the toilet bowl clean and shiny, like it happens in 5 star hotels. Here’s how to do it.

In our  homes  we tend to always have every room and every piece of furniture as clean as possible without traces of dirt and dust and use products suitable for each surface.

However, it happens that some areas of our  home  cannot be cleaned as thoroughly as we would like and this causes us great discomfort, especially when we have guests who can sometimes appear suddenly.

Toilet: Here is the trick to clean it like in luxury hotels

One of the dirtiest areas in the house is the  bathroom,  which even though we wash it daily due to daily use, is always messy.

But in this case there is an element of the  bathroom  that is always dirty, even if we wash it continuously, due to its constant use and the yellowing that occurs over time.

We are talking about the  toilet  that we use for our purposes and therefore often deteriorates or loses its shine and we are forced to polish it every day to make it shiny and clear again.

Water: the method to clean it perfectly

It happens, also due to the  silicone  that retains the water, as well as for the taps, that it turns black towards the bottom and a black halo forms that we cannot remove.

We must be careful not to rub too hard to remove this dirt because we could remove the silicone and damage our toilet which will start gushing water and we would have to  ask the plumber for help.

But not everyone knows that there is a perfect  method  to make our toilet clean and shiny, and this trick is often used by the chambermaids of five-star hotels to make customers happy.

The process and the natural ingredient

Before using the purchased product to clean the  toilet,  you need to clean our toilet with toilet paper. Immediately afterwards, put a spoonful  of soda  into the toilet, preferably the ecological and multi-purpose toilet.

Once this is done, using  rubber gloves and being careful not to let the products come into contact with the skin, spray  the plumbing cleaning product  onto a sponge and begin rubbing it on each surface of the toilet.

Once the  toilet bowl is covered with the product,  take a  microfiber cloth  and wet it and squeeze it well and put it on  the toilet  so that all the previous cleaning agent is absorbed.

Water: the method to clean it perfectly

Then cover the  toilet bowl  and use the brush to remove all  the soda ash  and let it drain onto the floor. Finally, take a teaspoon of this ingredient and dissolve it in water.

Take a surface cloth and moisten it with the solution and pass it over the  toilet seat  so that all residue and excess dirt can be removed.

In this way, our  toilet bowl becomes  absolutely clean and disinfected and remains shiny for a long time, which makes everyone who uses our bathroom jealous and asks us the secret of such a thorough cleaning.