How to make a homemade seal to protect your roof from rain

To protect the roof from bad weather, maintain its insulation and optimize its sealing, some opt for a water-repellent treatment. This Au or acrylic resin based product fills micro-cracks, reduces roof porosity and prevents moisture damage. When sealing terraces, roofs or facades, care must be taken to create a waterproof barrier against rainwater. There is a natural seal against moisture and rain on the roof.
Roof maintenance is essential to prevent eau, eau leaks, moss, and mold from entering your home. Most people first try to clean the roof to remove the foam and then repair the broken or cracked tiles or damaged Gardoise panels. Discover in this article an anti-foam treatment that creates a protective film on the roof and protects against rain.

A treatment that guarantees resistance to the eau of the roof
Humidity can have a significant impact on your health, but also on walls and ceilings. Excessive humidity can lead to mold growth on walls, aging joints, leaky pipes, or clogging of gutters. In other words, your home can be completely exposed to humidity if it is not protected.

Roof foam removal – Source: spm

If you like to tinker and are looking for an innovative solution to perfect the waterproofing of your roof, here is a natural waterproofing agent:

You need the following ingredients:
½ Limestone
2 bars of white soap
½ Buy kilos of Alun-Potassium (at the pharmacy)
A metal bucket with up to 20 liters of eau
A home remedy for bad weather – source: spm

Step 1: First, clean the roof by climbing on the roof to remove dirt, dead leaves, and stains from the roof shingles. Then apply an anti-foam agent. This cleaning should be done 3 days after the last rain

Step 2: Fill a container with eau, then add the limes and bring the mixture to a boil.

Step 3: Cut the Alun stone into small pieces and place them in the container. Stir the mixture vigorously to dissolve all the ingredients.

Phase 4: On the roof, fill cracks with a trowel 3 millimeters with cement mortar ;

Step 5: Fill the cracks by placing the remains of the soap bars, then apply the waterproofing agent with a brush or brush.

Step 6: Allow to dry for 1 hour before applying another coat of waterproofing to best protect your home from the elements.

If you are concerned about roofing work, do not hesitate to hire a specialist for waterproofing treatment. This protects the inside of the ‘from rain, dust and dirt as well as from fungal attacks caused by the’ moisture.

The right measures to protect your home from the problems of humidity
Formation of fittings on glass – Source: spm

To prevent your home or apartment from becoming ill, certain measures are essential:

In the kitchen, don’t forget to cover the containers and light the extractor hood to fight against the steam from Au
Dust the ventilation grilles regularly
Keep your home at 19°C to avoid cold air condensation
Reduce the duration of your showers and avoid using anything that is very hot when showering
Dry your laundry outside or in a ventilated room
Ventilate your home for 10 minutes every day.
In addition to these steps, you need to know how to identify health problems such as leaks or water intrusion and thermally insulate the exterior walls to protect them from humid climates. All of these tips are a preventive treatment and guarantee the longevity of your home.

Article navigation