![](https://omastippsundtricks.info/wp-content/uploads/2023/08/image-71-1024x576.png)
Nobody ever thinks of mixing salt and toothpaste, but it is a suitable mixture to remove any residue that gets stuck on the drain pipes. How is it created? Let’s find out right away.
What causes clogged drain pipes?
Clogged drain pipes are a common problem that can cause significant inconvenience in our daily activities. When pipes are clogged, water does not flow properly and can pool in the sink, causing unpleasant odors and possible damage to the system. In this article, we’ll look at the most common causes of clogged drains and the possible remedies you can take to resolve the problem.
One of the main reasons for clogged drains is the accumulation of debris such as hair, soap, food particles and grease. Over time, these materials can build up in pipes and gradually reduce water flow.
Excessive use of harsh chemicals such as dishwasher cleaners or degreasers can cause damage to the pipes. These products can corrode pipe materials over time, causing deposits to build up and restricting water flow. Sometimes clogged drain pipes can be caused by problems in the external sewage system. The system could become blocked by leaves, branches or other debris, preventing proper water flow and resulting in a blockage of the internal pipes.
Damaged Pipes: Flush pipes can become damaged over time due to wear and tear or improper installation. Cracks or breaks in pipes can cause debris to build up and affect water flow.
Salt and toothpaste: the remedy that few people know about
Regular cleaning is essential to prevent the flushing pipes from clogging. Using a flexible wand or a special product to unclog pipes can help remove the accumulated debris. Alternatively, you can also use a mixture of salt, toothpaste and dish soap. Stir vigorously, then pour into the pipes and leave for about 60 minutes. Run in hot water and you’re done!
![Salt and toothpaste Salt and toothpaste](https://www.nanopress.it/wp-content/uploads/2023/07/sale-e-dentifricio-1.jpg)
To maintain the integrity of your drain pipes , you should avoid excessive use of harsh chemicals. Instead, you can opt for more natural solutions, such as white vinegar mixed with baking soda, which has cleaning and disinfecting properties.
If blockages or damaged pipes persist, it is advisable to seek the help of a professional plumber. These experts are able to pinpoint the source of the problem and take the necessary steps to restore proper water flow . To avoid future traffic jams, it’s important to adopt a number of preventative habits. Please also note that the above remedy has been recommended by some experts in their tutorials. Always consult an expert before attempting it