How to permanently remove mold from the bathroom: for the shower, curtains and tiles

Bathroom surfaces are a breeding ground for mold growth. Moisture sets in between tiles, joints or even shower and bath curtains and leaves unsightly stains that are not always easy to remove. Never mind, just opt ​​for the right methods to get rid of it. Here you are.

The bathroom is a room that is often exposed to the heat/humidity duo. And when you say moisture, you say mold. We propose natural solutions that require little time to execute before reaching their full potential to combat the inconveniences of humidity, without chemicals or bleach.

Aside from its unsightly appearance, which alone would motivate the laziest of us to clean up, mold can continue to spread. But that’s not all, because this manifestation of dampness is also dangerous to health. It causes allergies, breathing problems and therefore worsens the symptoms of asthmatics and allergy sufferers

Black mold spots on bathtub joints – Source: spm

How do you get rid of mold in the bathroom?
– Eliminate mold in shower stalls, bathtubs and tiles
What will you need:
Half a liter of water
200 cl lemon juice
4 tablespoons baking powder
250 cl white vinegar
In a bowl, mix white vinegar, water, and lemon juice. Stir this mixture well and soak a microfiber cloth in it, then apply the solution to the traces of mold without rubbing , so as not to encourage the spread of the spores and thus aggravate the situation. Leave on for 20 minutes and then rinse with clean water before moving on to the next step.

Now that you have disinfected the surface with lemon and vinegar, apply a paste of baking soda made with a cup of this white powder and a little water. Use a stiff-bristled toothbrush to scrub dirty areas, including tile joints and corners. Then let stand for 1 hour.

Moisture stains and tile joints – Source: spm

All you have to do is rinse the treated surfaces without neglecting the other washable areas. To do this , spray hot water to remove any residue and then allow the surfaces to dry. It should be noted that it is best to ventilate the room if you have a window or consider a dehumidifier. Do not hesitate to repeat the anti-mold process if you consider it necessary.

Moisture and mold are also among these problems, which can be quickly solved with a ubiquitous ingredient in the kitchen, namely coarse salt.

– Remove mold from shower curtains
Damp stains on the shower curtain – Source: spm

Whether fabric or plastic shower curtains, they are not spared from the consequences of moisture. In this case, you need to include your washing machine in the cleaning process. To do this, place your shower curtains in the washing machine and turn on the gentle cycle. Pour a mixture of baking soda and homemade laundry detergent into the detergent drawer during the wash cycle, then add some white vinegar during the rinse cycle. Skip the spin cycle and allow items to air dry.

Clean Shower Curtain – Source: spm

How to prevent mold from appearing in the bathroom?
Since mold is the result of moisture, it is best to dry the tiles, shower curtain and shower enclosure after use. As mentioned above, ventilation also allows the hot vapors to be removed rather than allowing them to float in the air and thus affect surfaces. This way you guarantee easier air circulation. You can also dry these surfaces with a microfiber towel to remove excess moisture.

To get the most out of these solutions, the key here is to perform regular cleaning and adopt the right gestures so that you never have to deal with these unsightly stains again.