Say goodbye to mold on the window seal: the effective home remedy

Here is  the effective home remedy to put an end to mold on the window seal  . We’re talking about the  walls of the washing machine, where unpleasant dirt and mold accumulate  . Follow us.

Clean the washing machine thoroughly

Can you recognize your washing machine by the  eraser stained with black dots   ? You must therefore act quickly because this dirt does not remain without consequences for the proper functioning of your washing machine.

In fact, not only is the machine not able to clean the laundry perfectly, but it also emits an unpleasant smell. In the worst case, the  washing machine  will stop working and the repair will cost you dearly.

Faced with this accumulated blockage,  it is important to carry out a careful cleaning, whether at the level of the rubber, the basket or the filters  . In fact, these different components complement each other and a malfunction in one of them causes poor operation of the rest of the machine.

To clean the machine, you will need to bring bleach, vinegar or soap, or even liquid ammonia.  As we all know, bleach is a great product for fighting  mold  .  In addition, it is a preventive solution.

To  remove mold from the edges of the washing machine  , do the following:

  1. Soak a cleaning cloth with bleach
  2. Place on the rubber parts of the washing machine
  3. Wait twenty minutes
  4. Remove the cloth
  5. Wash
  6. Dip the cloth in bleach again  and  scrub

Say goodbye to mold on the window seal: the effective home remedy

If you don’t want to use bleach, you can put together this  ultra-effective detergent  , consisting of:

  • ¼ cup pure  lemon juice
  • A glass of hydrogen peroxide
  • Two liters of water

Here are the steps you need to follow:

  1. Put on gloves and wear a mask
  2. Mix all ingredients in a container
  3. Pour into a spray
  4. Spray on all parts of the rubber and on all parts of the machine
  5. Leave the product on for 8 minutes
  6. Dampen the cloth with lukewarm water
  7. Scrub to remove traces of mold
  8. Use a sponge with an abrasive side to remove the most stubborn mold
  9. Rinse with soapy water
  10. Use a clean cloth to dry